Melange pullover
Raglan pullover with a wide neckline is knitted in melange yarn with a silver sheen. The motif of openwork patterns will not let you get bored at work.
Sizes: 36/38 (40/42) 44/46.
To knit a pullover with knitting needles, you will need: 300 (400) 400 g of blue-beige melange Sari Ribbon yarn (90% polyamide, 10% metallized fiber, 120 m / 100 g); straight knitting needles No. 8 and No. 9; circular needles number 7.
Facial surface: persons. R. - persons. p., out. R. - out. n. In circular rows, knit faces. P.
The pattern of elongated loops: the number of loops is a multiple of 3 + 2 chrome. Each row starts and ends with 1 chrome.
1st p.: persons. p. 2nd p.: * 2 nakida, 1 person., repeat from *.
3rd p.: * Slip 3 sts as faces., while lowering the yarns of the previous row and pull out the loops, transfer these 3 sts back to the left knitting needle and knit faces together. cross, but do not remove the loops from the knitting needle, then knit 1 yarn over and knit the loops together again. cross., then remove the loops from the knitting needle, repeat from *.
4th row: out. n. Repeat from the 1st to the 4th p.
Pattern of holes: the number of loops is a multiple of 3 + 1 + 2 chrome. Each row starts and ends with 1 chrome.
Row 1: * P1, YO 1, Stretch 1 (= Slip 1 st as K, K 1 and pull through slipped st), repeat from *, finish P 1.
2nd and 4th p.: Knit loops according to the pattern, knit crochets out.
3rd row: * 1 out.. knit 2 sts together.. 1 yarn over, repeat from *, finish 1 out.
Repeat from 1st to 4th p.
Sequence of alternating patterns A: 8 p. pattern of elongated loops, 16 p. persons. smooth. 26 (30) 34 p. hole pattern.
The sequence of alternating patterns B: 4 p. pattern of elongated loops, 10 p. persons. smooth. 26 (30) 34 p. hole pattern.
Knitting density. Pattern of elongated loops: 13 p. And 11.5 p. = 10 x 10 cm; persons. smooth surface: 13 p. and 20 p. = 10 x 10 cm; hole pattern: 12.5 p. and 18.5 p. = 10 x 10 cm.
Melange raglan pullover description
Back: on knitting needles No. 8, dial 59 (65) 71 p. And tie for the strap 1 cm = 2 p. persons. satin stitch.
Then switch to needles No. 9 and knit in sequence A, while in the 1st p. pattern of holes evenly subtract 2 p. = 57 (63) 69 p.
After 6.5 cm = 12 p. from the last change of the pattern, close for raglan bevels on both sides 1 p. and in each 2nd p. 6 (8) 10 x 1 p.
After 14 cm = 26 p. (16 cm = 30 p.) 18 cm = 34 p. from the last change of the pattern, postpone the remaining 43 (45) 47 p.
Before: knit in the same way.
Sleeves: on knitting needles No. 8, dial 41 (47) 53 p. And tie for the bar 1 cm = 2 p. persons. satin stitch. Then go to the knitting needles No. 9 and knit in the B. sequence, while in the 1st p. pattern of holes evenly subtract 2 p. = 39 (45) 51 p.
After 6.5 cm = 12 p. from the last change of the pattern, perform raglan bevels on both sides, as on the back.
After 14 cm = 26 p. (16 cm = 30 p.) 18 cm = 34 p. from the last change of the pattern, postpone the remaining 25 (27) 29 p.
Assembly: sew raglan seams. On circular needles, transfer the pending loops of the back, left sleeve, front, right sleeve and knit on all 136 (144) 152 p. persons. smooth the neckline.
At a plank height of 4 cm, tie 1 circular p. out. and loops to close faces. Sew side seams and sleeve seams.
Front surface: with circular knitting - only persons. loops.
Garter stitch: with circular knitting, alternately 1 row of faces. p. and 1 row out. P.
Knitting density: 19 p. x 25 rows = 10 x 10 cm.
Attention! The pullover is knitted top down in a single piece.
Description of knitting melange raglan pullover
Type 108 sts on the needles, knit a circular face. stitch 4 rows. Then start inc to form the raglan bevels, distributing the stitches as follows: 36 sts of the back, yarn over, 1 st of the raglan line, yo, 16 sts of the sleeves, yo, 1 st of the raglan line, yo, 32 sts of the front, yo , 1 p. raglan line, yarn over, 16 p. sleeves, yarn over, 1 p. raglan line, yarn over. Continue knitting in this way, yarn over before and after the ragged lines on every second round.
At a raglan height of 25 cm, transfer the loops of the sleeves to additional knitting needles and continue to knit in a circle the loops of the front and back of the faces. satin stitch. At a height of 48 cm, knit 4 rows of garter stitch and bind off all loops. Then transfer the loops of the sleeves to the working knitting needles and knit around the faces. satin stitch, decreasing for the bevels of the sleeves in each 4th row, 1 st from the inside. At a height of 37 cm, knit 4 rows of garter stitch and bind off all loops.
Do you need a sweater in winter? Weird question. And not a thin jumper with a golf collar, but a full-fledged sweater - thick, long, shaggy, with a high spiky collar, woolen and coarse.
This summer, such a sweater makes you laugh in a huge pile, takes up extra space, tickles disgustingly ... And winter will come - where is my sweater? BUT?
Introductory when creating this sweater:
For a long time half-wool has been lying around in the house, bought no one knows when and no one knows why. And this "why" was clearly implied, otherwise how would there be 5 skeins of black and 5 skeins of white melange yarn on the mezzanine? I thought of something ... But I don’t remember what.
I wanted a pattern with spots, but it turned out - with stripes ... Stripes!
- So there was a destiny that exits to the street this winter are implied. I will stand there, walk, run, mince, stomp, walk, defile, move in dashes, pace and march.The main idea when creating a sweater is a high collar that fits snugly to the neck. Everything else is an appendage to the collar. Should the collar be attached to something? (Chinese labels are haunting - it's hard to laugh after them. I had to see one - "Chunky High Neck Sweater").
If perishing sweater - the long! Whether you are a boy or a girl, your grandmother's threats have been embedded in you since childhood. "Catch a cold!" or "You'll freeze the whole economy!". I remember. The conceived sweater will be below the priests and above the knee, that is, elegantly speaking, to the middle of the thigh. Almost a dress.
The yarn is melange, and intricate weave arans will not be visible. The main pattern is from a combination of front and back loops + simple braids and braids.
The type and color of the yarn encourages the idea of "rough knitting". That is, it should not turn out to be elegant women's clothing, but a utilitarian thing. Thing!!! FUR COAT!!!
The thread is quite thick, and the knitting needles, on the contrary, are thin (No. 2.5), so that the knitting then fell off and turned into a "boot". If it’s a sweater, it’s such that you don’t have to put on another blouse under it, another sweater ...
And one more thing: there is a favorite Soviet film "The Elder Son", revised a hundred or even two hundred times. And Busygin's sweater has already become a symbol, a value, a memory, an example of style, evidence of a way of life, an occasion to "remember" and "feel". The girl Natasha also had a hand-knitted sweater, only red-brown. Busygin's sweater, if you believe your eyes, was knitted with the front surface, and Natashin - with an elastic band. Here is the super idea - following the style of Soviet needlework.
Busygin (N. Karachentsov), Natasha (S. Kryuchkova),
Silva (M. Boyarsky), Vasenka (V. Izotov).
Technological techniques that were used when knitting a black and white sweater.
I. It has long been tormented by the question, are there people in nature who literally repeat knitting instructions from books and magazines, like this they take and knit according to the written word: "Take wool "Srytefgckhgf" from the series "Rrtdfc", knitting needles No. 3.5; dial 72 loops; add 4 loops in every second row; after 24 rows transfer knitting to knitting needles No. 3; break the row into segments of 24, 36 and 12 loops ... "?
It is not difficult to guess that most knitters knit-improvise. To do this, you only need:
1) knitting skills (facial, purl + individual set of knowledge and skills),
2) patterns of patterns and
3) an approximate pattern, which can be replaced by periodic fitting.
Knitting is interesting in that you have to adjust the thing to your size, invent and think through technological tricks so that it is both beautiful and not boring. And what a pleasure it is to count loops! And all the households know that the howl "lost the noose!" is equal in strength to the suffering "I broke my nail!", and you have to run and console ...
What is here? And nothing special! But perhaps some knitting enthusiasts think of the same elements of a sweater or jumper. If it saves someone an hour or half an hour - that's lovely. But the main thing is different: it is important for knitters to look at the sample HOW IT LOOKS LOOKING. That's why I'm showing you my unique sweater.
I wanted to provide a full description, but the thread is black, and nothing can be seen in the photo. Alas. Therefore, below are just some technological steps and tricks.
II. When knitting raglan sleeves, the result will be such a blank. One piece: front + back + sleeves + collar (if conceived).
Disadvantages: difficult to mess around with a huge "pile" of knitting, shifting it all the time, adapting.
Of course, you need circular knitting needles on the fishing line. The upper part is knitted in a single piece on circular needles, and then you need to divide the knitting into 4 pieces and knit on those needles that are comfortable. The best option: have 4 sets of knitting needles of the same number (back, front, 2 sleeves). But you can get out: the deferred parts can be transferred to thick contrasting threads or knitting needles with a different number.
III. How to determine the right number of loops for the collar?
By the method of "selection" or "according to the sample."
1) Tie the sample with the same viscous as intended. count stitches (but) and measure the sample in centimeters (b).
2) Measure the neck; at the same time, think about what kind of collar you want - a tight-fitting or wide "collar"; finally decide which collar circumference suits (c).
3) And then apply the formula from the elementary school program (I remember it as the "cross" formula) in search of X, that is, the number of loops for the set:
a loops -b centimeters
x loops -c centimeters
a-b
x-c
x = (a Xc) :
b
IV. How to divide knitting into segments "front", "back", "sleeves" with circular knitting "raglan"? There is a golden rule: the number of loops must be divided by 3 (number A), and the resulting number A must be divided by 2 (number B). A is front and back. B is the sleeve. This is the first - rough - formula. The foundation.
And then you should flip the loops back and forth, not being afraid of anything and following your plan.
1) Take away a few loops from the back and add to the front part. Before same always slightly more! Especially the ladies.
2) Select the number of loops for the raglan line itself. This line is not a seam, but represents a seam. It can be 1 loop, and 2, and 3, and even 13, like mine. These loops must be taken away from the front, back and sleeves.
In general, you need to spend time on these calculations, redrawing the circle diagram several times and throwing loops back and forth. (There are many master classes on the topic of the raglan sleeve on the net, and they are clear and detailed).
A variant of the division of circular knitting into segments.
There are 124 loops in total. A is 41 loops, B is 20; and then throw the loops, following the idea.
"Scythe" is a raglan line, in this case wide - 13 loops.
Red arrows mark the points of further addition of loops.
Peculiarities:
1) "braid" (13 loops), that is, a raglan line, more sleeves (11 loops) are obtained! that's all right!
2) the front section is 12 loops larger than the back! that's okay too! I needed the drawing to fit.
v. Collar with button closure.
If a collar with a fastener is planned, then when casting on loops (at the very beginning), you should add the number of loops to the width of this very fastener: 4, 5, 6 ... As you wish. I added 4 stitches. But the drawing did not change: the same elastic band 2X2. You can knit a strap.
If you plan a double collar - with a hem - then you need to think and understand the principle.
And where do you want to make a clasp? On which side to make loops - on the right or on the left? Try on the collar and decide. It is difficult to write about it, but to decide on the basis of fitting is nowhere easier.
Where do I want the fastener - on the right or on the left? I tried on a knitted strip around my neck. Decided. And the loops are best done from the front. There and pin a colored pin - a mark, so as not to confuse anything.
The end result should be something like this.
The shawls on the two parts of the collar should be on the front side.
If the collar is knitted from above (that is, for the raglan model), then loops must be made on the first half of the collar on the wrong side. On the opposite!
And on the second half of the collar (that is, the one that will be adjacent to the neck), loops need to be done where you want.
At the bottom of the collar, the closure is as planned: loops in the front, buttons in the back.
And, accordingly, on the upper part of the collar (the one that fits first),
loops are made on the opposite side.
The distance between the loops is optional. The size of the loop is under the button. (Again - there are master classes on knitting loops. Various).
Overlapping (overlapping, closing in a circle) at the very end, that is, before moving on to knitting the details of the front, back and sleeves, is done simply: arrange the knitting needles in parallel so that the knitting needle with loops is on the outside, and with buttons - inside; and mix the loops in turn: 1 loop from one knitting needle, 2 loops from the other, etc. Everything will work out by itself: the bar with the loops will be on the outside, as it should.
VI. In what order, with what frequency, to add loops when knitting raglan sleeves?
And there is again golden rule: in every 2nd row you need to add 8 loops, that is, in each place of addition - 1 loop.
Where are these places? In the diagram above, these places are marked with red arrows. And if it's simpler, then this: on both sides of the raglan line. When knitting, you can use marks: thread marks, colored pins, special separators, etc.
1 row - add 24 loops, that is, in the place of addition from 1 loop, knit 3 (loop, yarn over, loop).
5 row - again add 24 loops.
On the details of the front, the bar stands out simply: with garter knitting (all loops on both sides are facial). Garter stitch is good because it does not twist into a tube and holds the edge well.
A thing made of black yarn - hard to see.
But on the right, you can consider the bar connected like this:
1 front loop (plank border), 4 loops - garter stitch.
And on the details of the back, the bar should be knitted differently: add 5 loops (or 4, 6, 7 ...).
The part should protrude, as it happens on patterns of slots, codpieces, and so on.
And after the side seam connects the front and back, you need to fasten this bar with a few horizontal stitches from above. Everything. The cut is ready.
VIII. When knitting a model with a raglan sleeve, there is always a headache: how to finish the work, how to knit an elastic band? Just close loops? It won't be pretty. And a wave will go along the edge!
Everyone is looking for their own ways to get around this misunderstanding. Many knit the elastic separately, and then attach it to the part using the knotting method. (Oh! There are many master classes! And there are many different tricks! How many masters - so many ways).
1) transition to thinner knitting needles (No. 1.5);
2) after several rows we make a "fold" in the traditional way: from 3 loops - one, and in the next row or through a row we knit three from the 1st loop. That is, we return to the original number of loops. Where there will be "holes" from the decrease-addition, there will be a good neat fold;
3) knit the same number of rows as before the fold;
4) and then just fold and sew with a blind seam, without pulling the thread. Everything.
An option for forming a fold, following the "elastic band" pattern:
1 row: purl 2 loops, and knit 3 together, etc.;
2 row: all loops according to the pattern;
3rd row: purl 2 loops, knit 3 facial loops from 1 loop, etc.
What is the result? The hidden seam is not visible. Once.
Doesn't pull anywhere. The cut angle is a pure perpendicular. Two.
A technique such as raglan knitting on top is widely used by hand knitters. Models with raglan sleeves do not have seams, which makes the knitted item lighter and more comfortable.
Pros and cons of knitting raglan from above
Knit raglan on top with knitting needles - easy, beautiful, convenient, practical
Advantages of raglan knitting technique from above:
- lack of seams;
- fast execution of the product;
- the possibility of changing the size of the finished product;
- use of one thread when knitting;
- a large selection of models that can be knitted from the neck without seams;
- the use of raglan lines as a decorative element of the product.
Cons of raglan knitting technique from above:
- an exact calculation for a specific product size is required.
Getting Started
It is better to start mastering the technique of knitting a product from the neck without a complex pattern.
Getting started, you should decide on the model. The presence of a fastener, neck, sleeve length, size - everything must be taken into account.
What will we need?
- Sketch of the desired model.
- Circular knitting needles - it is necessary to choose, taking into account the thickness of the thread.
- Yarn - is selected depending on the model and size.
- Threads for marking.
- Stocking needles for working on a seamless sleeve.
Calculate neck length
For a more accurate understanding of how to knit a raglan on top with knitting needles, it is necessary to calculate the length of the neck. Initially, the circumference of the neck is measured. For example, the girth of the neck is 34 cm, then they find out how many loops need to be dialed for a given length.
We calculate the loop test
First you need to determine the density of the loops per 1 cm of the canvas.
The calculation of the loop sample assumes the following algorithm:
- For the sample, a fabric is knitted with a size of 20 rows and a width of 30 loops. For the most accurate calculation, when knitting a sample, it is necessary to use the knitting that will be used to make the main product.
- The finished sample should be washed and steamed, which will allow for a more accurate calculation.
- Calculate loops of 1 cm using a ruler.
- The result of the loops must be multiplied by the length of the neck circumference.
For example, consider the option when the density is 2 loops. The girth of the neck is 34 cm. Based on the calculations, the length of the neck should be 34x2 = 68 loops.
We calculate the neck loops by segments
From this amount, it is necessary to subtract 8 loops for the design of raglan lines, divide the rest by 3. As a result, 20 loops are obtained for each segment.
Given the height of the neck of the front and back, you should calculate the number of loops of these parts. Masters recommend doing this calculation as a percentage, namely, leave 45% of the loops for the front; 35% for the back, the remaining 10% for the sleeves.
Now simple mathematical calculations will help to calculate the loops by segments.
60 loops - 100%, making up the proportion, you get:
- before 45% - 27 loops;
- back 35% - 21 loops;
- sleeves 10% - 6 loops per piece.
In this case, 2 loops are used to decorate each raglan line. Depending on the pattern, this number may vary, in any case, it must be a multiple of 4.
Another important point in the calculation is the scheme. The detailed description looks like this.
In the center of the sheet, a circle “the neck of the product” is drawn, which consists of 68 loops. 4 beams are drawn from the circle - “raglan lines”, between the lines - segments of the product. The upper part is the back, the lower part is the front, the side parts are the sleeves.
For the correct knitting of the sprout, it is necessary to divide the loops of each segment, except for the back, into parts. The sleeves, counting from the back to the front, will be divided as follows: 3 loops, 2 loops, 1 loop - for each sleeve.
The loops of the front are divided, starting from the center. On the diagram it will look like this: 2,3,3,5,3,3,2, where 5 loops are the center of the front neck.
The essence of technology
The essence of the technique is a phased knitting of all elements.
Work begins with the neck. To do this, you need to dial the calculated number of loops on the knitting needles and connect them in a circular knit.
Since the height of the neckline of the front and back is different, it is necessary to knit a sprout. Therefore, partial knitting of the back is performed.
Part of the back and sleeves, called the sprout. To do this, the work is turned back to itself. Now it is necessary to determine the beginning of the row of the germ. Based on the scheme, the 3rd loop of the sleeve will be considered the beginning of the row, when viewed from the back.
This is where you should start:
- The product is unfolded, the first loop is knitted with a crossed crochet, the rest - in a pattern. All loops of the back and the first three loops of the second sleeve are knitted.
- Now you should turn the product and knit the first loop from the broach, then 3 loops of the sleeve in the usual way. Having reached the raglan line, an addition is performed.
- The last loop of the sprout should be knitted together with the next.
- Having turned the work to the wrong side, continue knitting according to the pattern.
So knit until the formation of the neckline.
When knitting on top, you can choose any convenient way to design a raglan line. Depending on how the pattern will look on the finished product, the master chooses the execution of lines.
There are two main ways:
- The most common and easy to perform raglan design is 2 front loops without holes. Regardless of how the main knitting is done, raglan lines are knitted with facial loops, according to the following scheme: before and after the line, an addition is made from the broach, 2 loops of the line are knitted with facial loops.
- An equally easy way is 1 wrong loop in the center of the raglan line. This design looks good on the front surface. It is performed as follows: in front of the raglan line, an addition is made from a broach, then 1 purl loop and again an addition. So the fragment is knitted to the end of the raglan.
We make out the gate
Making the gate from the neck can be done in different ways. In the first case, the gate is made out at the beginning of knitting, and then the whole product. In another case, the collar is knitted last.
The first method is used when knitting a product with a low elastic collar.
The execution technique is as follows:
- 1 l.p., 1 out. removed with a crochet in front of the canvas;
- 1 l.p., removed with a crochet behind the canvas, 1 out.
Knitting continues until the required collar size. The second method is more convenient when making the original gate. The collar is knitted from the neck loops, which are typed on the knitting needles, then continue the main knitting.
Some models are made with a separate knitting collar, then it is sewn at the end of work.
Shutdown
At the end, an elastic band is formed, the loops are closed. A placket is made with buttons and a collar.
Raglan top knitting for women (master classes)
Raglan on top with knitting needles is used when knitting various female models. A detailed description of the scheme will help you understand how to tie a stylish thing.
Raglan neckline with button placket and stand-up collar
Getting started, you need to perform correct calculations. Having decided on the number of neck loops, the strap loops are calculated.
Women's raglan As an example, a neck of 48 loops is given. Cast on 8 more stitches for plank. Then 16 loops will go to the shelf, and the rest will be divided into the back and sleeves, respectively.
In the first row, the 1st hem is knitted with the front, in the remaining rows it is removed.
Knitting pattern:
- 1st row - the first and last 8 loops - strap: 1 out. removed, thread before work, 1 l.p. in the usual way, so alternating, knit 8 loops, the rest are knitted with stocking stitch;
- 2nd row - plank according to the pattern (purl loops are removed with a thread in front of the product), the remaining loops are knitted with an elastic band 1x1, knitting the front from the previous row, and the wrong one in the usual way;
- 3rd row - repeats the 1st.
In order not to get confused with the pattern, knitting professionals advise marking each bar with markers.
After knitting the gate, proceed to the distribution of loops to perform raglan.
Here it is also worth marking the raglan lines with markers.
Scheme:
- The first row is knitted according to the main pattern. Planks are knitted without changes until the end of the product.
- The second row, all loops are knitted facial, raglan - out. P.
- Starting from the third row, a sprout is knitted, then the knitting of the product continues, making the necessary increases in the lines.
Nautical style pullover with raglan
The product in a marine style can be knitted using a combination of white and blue yarn. For work, you need to prepare 450 g of white yarn and 150 blue, circular and stocking knitting needles.
Stages of work:
- Cast on 77 stitches of white yarn on circular needles.
- The first row - out. loops.
- Loops are distributed according to the scheme for determining ragged lines.
- Increases are performed only in the front rows until the sprout is knitted, then work is performed in a circle of 15 rows.
- The next 4 rounds are knitted with blue yarn.
- Changing the yarn every 4 rounds, knit to the waist.
- Next, the fabric is knitted with white yarn, the elastic band of the pullover is made in blue.
- The sleeve is knitted on stocking needles with white yarn to the elastic.
- The elastic band is made with a blue thread.
Cardigan with openwork diamonds
This model is made according to the scheme of knitting a sweater with a strap. But the main difference from knitting sweaters is the length of the product. The cardigan can be elongated, fitted or loose.
The openwork rhombus pattern is knitted according to the following pattern:
For example, a sample of 17 loops + 2 edge loops is used, the pattern repeat is 12 rows. All even rows are purl, and the pattern is formed in odd front rows.
The size of the rhombus can be chosen according to your choice. Choosing small rhombuses, the product will turn out to be more openwork.
The basic principle of knitting such a pattern involves knitting from yourself, and knitting the following loops along with a change in slope, so that you end up with a clear rhombus in the pattern.
Having mastered this pattern, you can easily apply it in the main knitting of a cardigan with a raglan sleeve.
Raglan top knitting for men
Men's clothing knitted using raglan on top will appeal to both young people and men of age.
Master class knitting raglan men's sweater
Having carried out a preliminary calculation of the loop test, the number of loops for the neck is 120. Sweater for size 54.
The knitting of the neck and the sprout is performed according to the classical pattern, then the loops are distributed and the raglan lines are marked. The entire piece is knitted in stockinette stitch.
The sleeve is knitted on stocking needles, the corresponding increases are made. The stand-up collar is made with a 2x2 ribbing, the same technique is used when making the ribbing of the sleeve and the bottom of the sweater.
Features of knitting children's raglan
Seamless clothing is especially good for children. The clothes are soft and comfortable. And the easiest way to knit such a thing is the raglan technique from above. Using the raglan knitting technique on top with knitting needles, you can get such children's things as sweaters, vests.
For girl
Especially often raglan is used when knitting dresses for girls. It will look good on a girl and a tunic knitted in this way.
The technique of knitting children's raglan differs in size, otherwise the techniques are according to the classical pattern. Calculation of a loop test, distribution of loops by segments, circular knitting with expansion in the area of raglan lines.
Things for a girl can be decorated with laces or embroidery, pom-poms or tassels. It all depends on the imagination of the knitter.
For boy
Models for a boy can be very diverse: pullovers, jumpers, sweaters, vests, sweaters. Having calculated in detail the required amount of yarn, they work on the selected model according to the classic raglan knitting pattern.
When knitting a thing, it should be periodically tried on for a child in order to correct the shortcomings in a timely manner. For a more colorful design, you can use a combination of yarn of different colors or decorate the finished product with embroidery.
Step-by-step instructions for knitting a children's raglan pullover
Having completed the calculation of the loop sample, and having determined the required number of neck loops, the loops are cast on the knitting needles.
Knitting is done with the front stitch from the neck, without a collar.
Order of execution:
- 9 facial rows: 1 air loop, 1 front, yarn over, 5 front, yarn over, 1 wrong side (raglan line), yarn over, 15 front (back), yarn over, 1 wrong side, yarn over, 1 front, 1 air loop.
- The purl rows are knitted according to the pattern.
- In the 11th row, they get 1 air loop on each side of the shelf and close the work in a circular knit.
- Knitting continues until the set of the required number of loops of the sleeves.
- The sleeves are removed on stocking knitting needles.
- Continue knitting without additions to the required length of the product.
- The last 6 rows are knitted with an elastic band 2x2 and close the loops.
- The sleeves are knitted on stocking needles with decreasing loops in every 6th row to the required length.
- The sleeve ends with a 2x2 ribbing.
- To decorate the gate, pick up the first loops of the neck on circular knitting needles and knit 4 rows with an elastic band 2x2.
This pullover is very comfortable. Can be worn by both boys and girls. By decorating with embroidery or other decorative elements, you can create an accent for a girl or a boy.
Making raglan lines: ways
Ways to design raglan lines are different. Depending on the taste of the author or the model of the product, the lines use classic 2 front loops without holes, a three-dimensional pattern of braids or openwork patterns.
Pattern "Scythe of 6 loops"
Knitting is done with front stitch, pattern repeat - 6 rows.
The scheme is as follows:
- front row - 1 yarn over, knit 6, 1 yarn over;
- purl row - according to the pattern, the yarn is knitted purl with the loop crossing.
So knit 6 rows, cross in the 7th row:
- yarn over, remove three loops of the braid onto an auxiliary knitting needle;
- knit the next three;
- return the first loops of the braid to the working knitting needle and knit them with facial ones.
Pattern "From holes"
The openwork raglan line looks great on products made of fine yarn. The number of loops of the line can be any. The easiest way to draw openwork raglan lines is to increase with a regular yarn.
Knitting steps:
- on the front side in front of the raglan pattern, a regular yarn is made, 2 front loops of the raglan line, yarn over;
- on the wrong side, all the loops are wrong, including the crochet of the previous row.
Another very beautiful way is the herringbone pattern. Pattern repeat 10 rows. All additions in the front rows, purl - according to the pattern.
Execution steps:
- 1st row - nakid, facial, nakid;
- 3rd row - yarn over, knit 3, yarn over;
- 5th row - yarn over, knit 5, yarn over;
- 7th row - yarn over, knit 7, yarn over;
- 9th row - yarn over, knit 9, yarn over.
In every 11th row, the pattern is repeated. The result is a pattern of holes that resembles a Christmas tree. Such a raglan line looks great on products made of thin yarn knitted on top of both adult and children's models.
The fantasy of the master will tell him the choice of the most suitable design option for the line. Raglan sleeves are an easy and convenient way to make knitted things with your own hands.
How to knit a raglan on top of the knitting needles, loop calculation:
How to tie a raglan top with a placket and stand-up collar:
How to tie a raglan sprout from above: