How to assemble a paper swan from modules. Paper origami swan: a few step-by-step master classes. How to make a swan out of paper: instructions

The classic origami technique is the folding of various paper crafts without the use of scissors and glue. In addition to the classical technique, other types of work with paper have become widespread. One of the most popular is folding three-dimensional figures using numerous paper modules. Modular origami swan is a prime example of what beautiful figures are created using triangular details.

Bright three-dimensional models attract everyone's attention. It seems that the creation of such works requires special knowledge and skills. However, even a novice amateur can assemble such a craft. It is worth carefully studying the master classes on this technique, and following the recommendations of experienced craftsmen. Crafts made using this technique require, first of all, attentiveness, perseverance and painstaking work.

Each master has its own constructor. This constructor includes parsed elements of old or unsuccessful figures. Triangular parts are also assembled in advance for new works. To create modules, color or white A4 paper is used.

The sheet is divided into 2, 4, 8, 16 or 32 equal parts. Most often, paper is cut into 16 or 32 pieces. For children, to make it more convenient and easier for them to assemble the craft, the paper sheet can be cut into 4 or 8 parts.

To get 16 identical rectangles, the paper sheet is divided into 4 equal parts in width and length. For 32 rectangles, the sheet is divided in width into 4 and in length into 8 parts.

Triangles are assembled from such rectangles to create three-dimensional paper figures.

To make a module, you need:

Bend a rectangular sheet in half. Bend the resulting rectangle in half again and unbend it. So two main folds of the workpiece are outlined.
The edges of the rectangle are bent towards the midline. The figure is flipped.
The bottom edge rises. The corners on the left and right are bent along the line of a large triangle.
Unfold the bottom.
Small triangles are folded along the marked lines from below. The edges are rising.
The resulting triangle is bent in half. It turned out a module with two pockets and two corners.

Triangles can be attached to each other in three ways:

Connected by long sides.
The connection goes through the short sides.
One module on the short side, two on the long side.

Which assembly method is used is usually indicated in the instructions for the circuit.

For newbies

Beginners will definitely need detailed step-by-step instructions for assembling a paper swan using the modular origami technique. Such instructions and step-by-step explanations can be seen in the video master classes of recognized origami connoisseurs.

There are many groups that share a love for this type of creativity, and where you can get advice on how to make an origami swan from modules with your own hands.

For beginners in specialized stores, a huge number of kits for working in the modular origami technique are presented - swan figurines and assembly schemes step by step.

Before you start assembling such an elegant figurine as a modular origami of a beautiful double swan, you should practice on lighter models. Simple models can also be assembled by a preschooler with the help of educators in children's institutions or with the help of a mother.

The most tiring for a child is the creation of triangular modules. Fine motor skills are not yet developed properly, and it is difficult for the baby to collect small parts. That is why it is better to assemble large and medium-sized modules for children's crafts. Preschool children quickly get tired of monotonous boring work, so the task of the mother is to help make blanks for crafts.

It is better to set aside a special time and day when all family members will work together to collect an openwork airy composition. The elements necessary to create a three-dimensional figure must be prepared in advance. It will be interesting for the child to engage in the creative process with their parents. Adults will be able to suggest how modular figures are assembled correctly.

An easy craft, the assembly of which does not require much time and pre-assembled blanks, includes the figurine of a small swan. To create a modular origami "little swan" you need to make 70 triangular modules, 69 pink or blue elements and 1 red for the beak.

Consider the step-by-step assembly of a small swan.

We collect the body. Base - 3 rows of assembled elements. Each row has 12 triangular blanks. The resulting strip is connected in a circle. It is necessary to give the resulting part the shape of a bowl.

The first wing - put on 4 modules. The next rows go in decreasing order: 3 triangles, then 2. Wing tip - two elements, put one on top of the other.

Breast - immediately after the wing, 2 modules are put on. 1 piece is fastened on top with the short side. The breast is ready.

Second wing. Immediately after the breast, the process of assembling the second wing begins. Both wings are assembled according to the same scheme: 4 parts, 3 elements on top, then 2 triangles. The tip of the wing is two rows of one triangle.

Tail. First row - 2 parts. 1 more blank is attached on top.

Neck, beak. For the neck we connect vertically 5 elements, the 6th row completes the red triangle - the beak. Gently give the neck a slight bend.

Connect the neck to the last breast module that was assembled with the short side.

Assembling such a small figurine will not take more than 10 minutes. You can create a whole family of beautiful birds. To make it more convenient for the child to hold the modules in his hand, the parts can be made large. A kid can make such a craft as a gift to his grandmother or mother. The size of the little swan can be changed by adding more blanks.

simple model

After the process of assembling a small craft has been mastered, you can start working on a more voluminous and complex figure.

To create one model, you will need 458 multi-colored modules and 1 red triangle for the beak. Fans of classic models choose black or white colors for crafts.

Consider the step-by-step creation of a modular origami swan from the prepared elements. The presented model belongs to the average level of complexity, requires accuracy and care.

A strip is assembled from 30 blanks, which is connected into a circle.
We do 4 more circles in the same way.
The resulting part must be carefully unscrewed. See that the modules do not fall out and the workpiece does not crumble. It turns out a figure shaped like a bowl. 2 more rows are attached to the top of the bowl.
On the 8th row, the process of forming wings begins. For the wings we attach 12 blanks, skip 2 parts. At the place of the pass, the neck of the craft will be attached. After the missing triangles, we attach 12 parts again. The remaining free area is a place for the formation of the tail.
Wings are made as follows. Starting from row 9, in each subsequent row, the number of paper modules decreases by 1. The wing is considered complete when 1 triangle remains.
In the same way, reducing each row by 1 detail, a tail is made.
The neck is made separately from 19 elements and 1 red triangle for the beak. The corners of one part are inserted into the pockets of another. Completed by a red triangle. The resulting part must be given a slight bend, similar to the position of the neck of a swan.
In the place left between the wings, attach the neck of the craft. It turned out a paper swan using the modular origami technique.

The main element of this craft is the body in the shape of a bowl. This technique is used to create other figures: vases, dragons, animal models and fairy-tale characters. Taking the swan scheme as a basis, you can create a voluminous heart.

Having studied the scheme for assembling a modular origami swan, a beginner is already able to come up with and implement his creative idea.

Many experienced craftsmen improve this type of craft, creatively rethink the approach to the classic assembly of the model. So, in the modular origami swan (the master class presents extraordinary models on the Internet), for example, the figurine is made in blue tones with an unusual wing shape.

Such an unusual craft can also be made in the colors of the country's flag.

Origami double swan

This type of craft is more complex. However, the double swan looks brighter, the figure turns out to be more voluminous. This is due to the fact that the model is assembled according to the principle of nesting dolls. There are several smaller ones hidden in one figurine.

Before you start creating such a masterpiece, prepare 1502 elements. To emphasize the unusual shape, add colored triangles. Then you will need:

Color blanks - 180 pcs.
White - 1322 pcs.

Part one

It will take 770 modules to build it.

For the base, we collect and connect in a circle 2 rows of 30 parts.
Add 2 more rows. We turn out the carefully received part. It turns out a figure that looks like a bowl. From above we make 10 more lines. While working on the figure, constantly correct it. Give a slim look.
We collect 15 rows in this way.
On the 16th line, we outline the places where the neck, wings, and tail will form. You will need:
Neck - 6 elements.
Wings - 10 pieces for each wing.
Tail - 4 elements.

We make the neck according to the following scheme:

6 modules: 1 pink, 4 white, 1 pink triangle.
Each subsequent line is reduced by 1 detail until 2 triangles remain. The neck is ready.

We collect the tail opposite the neck. The tail starts with 4 pink elements and one is removed from each line until 1 piece remains.

After completing the assembly of the tail, go to the wings. The construction of the left and right wings is the same.

First row: 1 pink triangle, 8 white and closes the wing 1 piece of pink.
Second row: the last module from the side of the tail is put on the inside of the corner.
Wings rise 10 rows, each line has 10 elements. To control the height of the wings, they must be collected at the same time.
Starting from the 11th row, the elements of the wing are reduced by 1 pc. in each subsequent row. The reduction goes among the white details. The pink border remains in place.
The wing is completed when 1 pink triangle remains.

So, the main part of the double swan is assembled. To prevent the created structure from falling and crumbling, make a stand of two rows. Strengthen the blanks of the stand for the stability of the craft with glue.

Part two - inner wings

The base of the second part is done similarly to the first figure. Only 20 elements are collected in a circle. After 2 assembled rows, we turn the craft blank and add 5 more lines. Be sure to draw out the figure.

Each wing consists of 10 parts: 8 white pieces in the center, 1 pink module along the edges. Each wing rises 3 stripes.

Starting from row 4, white elements are reduced by 1 pc. with each row until the pink triangle completes the wing line.

Part three

The beginning of the third part is similar to the two previous parts of the swan figure. There are 12 triangles at the base alone. The figure rises 6 rows and turns out. In the last line, 2 pink details are put on.

From row 7, we reduce each row by 1 white triangle. The last part is ready.

The three assembled parts must be carefully and carefully inserted one into the other.

Parts can enter tightly, cling. Slowly, without haste, push the base of the wider figure. After all the details of the future crafts are collected, start working on the neck.

Neck

For the neck, space was left for 6 modules, but it is better to assemble it from 4 or 3 parts wide. The length of the neck depends on the desire of the master. So that during the bending of a long workpiece the parts do not crumble, it is recommended to put them on glue. A red beak completes the neck. You can optionally glue the drawn eyes or make them from buttons.

The craft itself can be decorated with a chain, a bow or a thread of jewelry. Such a figurine is both a beautiful interior decoration and an original handmade gift.

"The Swan Princess"

One of the most beautiful three-dimensional figurines is the modular origami Swan Princess. It is in the creation of fairy-tale characters that masters and lovers of this type of creativity give free rein to their unbridled imagination.

The source of inspiration is the princess from the fairy tale of the same name. How many masters, so many models depicting a fairy-tale heroine. Someone creates a princess figurine, however, most like the creation of a fairy swan.

There are a lot of step-by-step ways to create this craft. For the base, you can take a classic model, add grace to the craft by making a longer and more curved neck, decorate the head of the figurine with a crown.

Prepare the following modules:

Green - 166 pcs.
White - 615 pcs.
Blue - 680 pcs.
Yellow - 335 pcs.

Start working on this model by creating a tail. The base contains 30 parts. The colors of the triangles can be combined as you wish or made according to the scheme.

After the blue petals are collected, the reduction of details begins from the top of such a petal. 1 element is removed from each side of the leaf.

For a magnificent tail, you need to collect 1 large feather and 8 small feathers.

Small feathers are made in two colors, 4 pieces each:

Connect 5 elements vertically, alternating 2 colors.
Put on 2 green triangles on 2 corners.
In the center - 2 yellow modules, and along the edges 1 green.
Next line: green, yellow, green, yellow, green.
Green, 2 yellow, green. The extreme parts are put on the inside of the lower module.
The following lines are made to decrease in a similar way.
The same feathers are made in a different color.

A large feather is assembled from two small ones located vertically one above the other.

Feathers are neatly attached to the tail. In order not to fall, it is recommended to put them on glue.

Assembly of the torso

The base consists of 36 elements. There are 11 blue lines going around the circle. From the 12th line, the breast of the craft begins to form. Coloring is collected from 2 strips. The center of the wings is highlighted in yellow, the breasts are green, framed by white triangles.

On 12-1 lines, a breast is formed in the center: 1 piece is removed each row.

Neck

Alternate elements in a line of 2 and 3 pieces. Height - 25 strips.

For wings, 7 parts are used from different sides, opposite each other. For each line, 1 element is also removed.

The tail is collected against the breast. To create a ponytail, 11 elements are used, the number of which decreases with each strip.

The stand is made of two circles of 39 modules each.

It is better to attach the finished craft with glue to the stand so that you can move and rotate it without fear that it will crumble. The figurines can be of different sizes - from a few centimeters high to one and a half meters and more. Large and tall crafts necessarily require additional strengthening of the composition.

The swan is a very beautiful bird. So I decided to post assembling a modular origami swan. Before assembling a modular swan, 1502 modules must be prepared, of which 1322 are white and 180 are pink.

once all the modules are ready, you can proceed to.

swan scheme modular origami

The first detail of the swan from the wings modules

We put the modules on the short side
30 modules per row
Collect 5 rows, then turn the workpiece.
Collect 5 more rows, in the end you get 10
Then 5 more rows -15 all
We separate the modules: on the neck - 6 modules, on the wings - 10, on the tail - 4.
It's the neck
This is the tail
Let's start making wings
The first row is ready, for the second, put the module on one corner
We also collect 10 more rows
We make wings from two sides at once
After making 10 rows, then reduce the wings to 1 module
back craft
So the first part of 770 modules is ready

modular origami swan master class

Stand modular origami swan

We insert the modules with the short side down, with the corners outward between the swan modules, pre-lubricating with glue
Then we string another series of modules onto the glued modules, also lubricating them with glue.

origami modular origami swan assembly

Modular origami swan inner wings

20 modules in a row
We string 7 rows
Allocate 10 modules for each wing
Then we collect three more rows
When we raise it by three rows, we reduce the wings to 1 module
Here are the wings

Wing insert

We collect 12 modules in one row
Collect 6 rows
We divide the row and string the modules along the edges into one corner, thereby reducing the row to one module
Insert ready

Here are all three details

We insert blanks

We assemble the neck, take 3 or 4 modules

That's it, good luck.

modular origami swan

The rainbow swan is the most beautiful thing that could be created from the swan family. The rainbow swan took the best, because the rainbow is the most beautiful thing that mother nature could come up with.

I want to introduce you to a completely new version of the "Rainbow Swan".

Look carefully at the photos, count the modules, follow the instructions and you will have a beautiful Rainbow Swan.

You probably remember the famous expression for memorizing the colors of the rainbow - "Every Hunter Wants to Know Where the Pheasant Sits." It is these colors that we will use: Red, Orange, Yellow, Green, Blue, Blue and Purple. Modules are best used in size 1/16, we also need modules in size 1/32 of the same color, PVA glue.

Origami is not only a hobby, but also a way to add coziness and uniqueness to the house. Paper figurines are cheaper than figurines and paintings, but no jewelry from the store brings its owner so much pleasure from the realization of the forces invested in the work. The admiring glances of the guests are the best compliment to the hostess. In this article we will tell you how to make a swan out of paper.

What is modular origami?

Modular origami, which originated in the 18th century, remains popular to this day. This type differs from classic origami by the large number of sheets of paper used. Folded according to the principle of classic origami into triangles, the sheets are nested into each other according to the designer's method, giving unlimited scope for imagination and creativity.
When creating complex designs in modular origami, glue is used, ensuring the reliability of the structure. Strongly glued product will serve as a great toy for children.

How to make a swan out of paper: instructions

A majestic paper bird swan, with due patience and perseverance, is done in an average of 40-50 minutes, depending on the size of the structure. This article provides a diagram of how to make a swan out of paper, 30-40 centimeters high.

In the manufacture of this model, there is a procedure by which it is folded, and if you follow it, you will not have any difficulties.

Modules are pre-prepared - multi-colored triangles. They form the body of a bird. For the average model, you will need 458 white modules (you can experiment with the color to your taste, we chose white) and 1 red, orange or pink for the beak.

Popular articles:

Necessary materials

All we need:

scissors;
glue;
paper.

The swan is made from triangles, which are folded out of paper according to the principle of classic origami. For them, you need to make 458 identical rectangles. The height of the entire figure will depend on their size. The aspect ratio of the triangles should be approximately 1:1.5. You can use halved squares of office paper, or cut A4 sheets.

If an A4 sheet is divided into four lines along and four lines across, you can get 16 rectangles about 53 by 74 mm in size.

If you divide an A4 sheet into 4 lines along and 8 lines across, you get 32 rectangles measuring about 37 by 53 mm.

Preparation for work

How to make a paper swan using the modular origami technique?

First of all, we add the modules themselves, from which we will make up our design - a swan. They are very easy to make.

Place the rectangle horizontally on the table. Then fold it in half.

In order to outline the middle line for yourself, you need to bend the resulting element in half, and then unbend it back.

With a slight movement of the hand, turn the workpiece up.

We bend the protruding corners up, ideally leaving a small gap between the upper and lower parts.

Now you need to raise the edges.

And finally - fold the triangle.

Here we have a triangle that has two corners (Fig. 1) and two pockets (Fig. 2)

They can be fastened in various ways. Several of them are used in the swan assembly scheme.
When we have 458 modules of the required colors (however, they can be made as needed), it is time to start assembling the bird itself.

So, let's start assembling the swan!

To make the first two rows, we need to place three modules on the table like this:

Now we take the two front corners together and insert into the pockets of the third:

We attach two more on the sides:

And two more:

And we see that we are holding in our hands a rapidly disintegrating construction that threatens to crumble on our table and destroy our hopes for the realization of beauty. But don't be upset: very soon this design will become quite strong even without the help of glue. And in order to make it even stronger, you can start collecting three rows at once:

We continue according to the already studied scheme to fasten the fourth and fifth rows:

When the fifth row is finally ready, and either a skirt or a Christmas tree lies in front of us, we carefully take it on the left and gently press with our thumb on the middle, turning the circle inside out.

We take the resulting saucer:

We bend the edges up so that the edges of the saucer become higher, and the saucer itself becomes smaller.

Moving to the seventh row, we begin to leave passes for the neck and wings. We put on 12 modules and move away two corners at an equal distance from each other. That is, the seventh row will be 24 modules and two gaps, each of two modules: one for the neck, one for the tail.

Now, from the eighth row, we will make out the wings. We do not touch the gaps, we put the modules on the 12 remaining triangles, again - in a checkerboard pattern. The number will be 1 less - 11.

In the process of making the wings, they can be slightly touched up by hand bending and making them more natural.

When the wings of the paper swan are finished, turn the body of the swan to the side where we will have a tail. We make it according to the same principle as the wings: in an odd order, decreasing one by one with each row.

The swan is almost ready, it remains to draw the neck and head. Let's do this with 19 white modules and one color. The last, colored one, which will serve us as a beak, is better to glue before that so that it does not look flared.

The paper swan neck is constructed using a different method. First we need to arrange the modules in a wedge:

And combine them:

Finally, we solemnly put the beak in place, for reliability wetting its inner sides with glue:

We attach the resulting swan neck to the remaining two corners:

The head of a swan can be decorated with a drawn, cut out of paper or ready-made eye, a bow can be attached to the neck, and the bottom can be made in the form of a water lily. There are many possibilities for decoration. Let your imagination run wild and your creation will become even more original.

Paper swan from modules

You can do a lot of interesting things with modules, but if you are just starting to learn this technique, then you should start with or swan simple design.

Modular origami is a special manufacturing technique various volumetric figures from paper triangular modules. It was invented in China.

To make, for example, a swan, a snake or a Christmas tree using this technique, you need to prepare many paper triangular modules and then connect them to get the desired design.

Origami modules are triangular in shape and they are made from rectangular pieces of paper. These rectangles can be of different sizes, for example 53x74mm or 37x53mm. To get the right size, you need an A4 sheet.

How to make an origami module

Prepare A4 size paper (standard paper from a sketchbook, or paper for printing or copying).

1. Fold the paper in half, butt again and again - if you unfold the paper, you will get 16 divisions.

* You can fold the paper one more time, then there will be 32 divisions, and they will be smaller.

2. Cut the paper into 16 or 32 rectangles.

* You can use both scissors and a clerical knife for this, the latter will be faster.

3. Fold one of the resulting rectangles in half in width.

4. Now fold in half lengthwise and return to the starting position (return to step 3). In the middle you now have a line with which you can fold the module evenly.

5. Fold first one side of the rectangle to the middle, then the other (similar to folding an airplane).

6. Now bend the edges of the segments that protrude.

7. You need to bend the protruding segments up.

8. Bend your design in half (connect 2 sides of the module).

Such modules need to be made as much as necessary to assemble the desired design.

How to make a triangular module (diagram)

How to make a paper module (video)

Modular origami. How to make a module

The main thing you need to have for modular origami is paper and great patience. Due to the fact that the figures in modular origami are not quite small, they need to prepare a lot of modules, several hundred to several thousand.

Each module has 2 pockets. With their help, you can connect modules.

Usually, when folding the modules, no glue is used, since the friction force does not allow them to disintegrate. But it happens that in some places the paper structure is not stable, then it is strengthened by gluing several modules with PVA glue.

Can be used both pure white and colored paper. Office paper will do, but pages from magazines and even candy wrappers can also be used. Plain colored paper is quite thin and rips at the folds. It can be used to create small modules (if you divide A4 paper into 32 parts).

To connect modules, simply insert them into each other. This can be done in several ways.

For example, like this:

Graceful, proud, regal bird - poetic natures reward the swan with such epithets. And the swan couple also personifies love and fidelity, although in nature this is not at all the case. Making a swan with your own hands does not mean just making another craft, it is something more, carrying a certain energy load to attract love and happiness into your life. This article will show you how to make a paper swan.

from one sheet

The easiest option for beginners:

Graceful origami swan from half a square sheet:

Scheme of assembling a small swan from a square sheet:

How to make a swan craft step by step:

Diagonal folds are made on a square sheet;
The sheet must be folded in half lengthwise and across;
Having received the necessary folds, a double triangle is formed;
The side triangles are bent towards the central axis. First lower, then upper;
The upper ones open back, and the top of the rhombus bends down. The whole figure is crushed and smoothed;
The layer of paper that is on top rises, stretches upwards;
One triangle is bent from left to right;
The whole figure bends in the middle;
Internal triangles are taken out to the sides;
Now you need to slightly stretch the swan, holding on to the points at the junctions of the triangles;
Pull first along, then vertically;
The head of a swan is formed from the edge of the left triangle.

Craft from modules

There is such a direction in the art of origami as the assembly of products from modules.

At first glance, it may seem that making such a voluminous swan is very difficult. Actually it is not. Making modules is a very simple task, assembling figures from them is also not difficult.

The most difficult thing is that the larger the figure, the more modules you need to make. If the paper sculpture must consist of several colors, then it is important not to get confused in color.

A4 office paper is best suited for modular figures. It is dense enough to hold the desired shape and does not tear on the folds.

How to make a module: A4 sheet is divided into 16 leaflets. Depending on the size of the module, the leaflets can be made either smaller or larger.

The leaflet needs to be folded in half lengthwise, then across, unfold again. From a rectangle folded in length, a triangle is formed with a vertex at the intersection of two axes. The bottom edges are folded up and ironed. Then the extra ends protruding beyond the edges of the triangle are hidden inside the fold. The workpiece is folded in half along the central axis. The module is ready.

How to assemble modules in stages:

The corners of two modules must be inserted into the pockets of the third.

The next two modules are inserted into the pockets on the sides.

In the same way, we insert two more modules.

So that the resulting workpiece does not crumble in the hands, we fasten the two ends of the modules with another module, thereby forming the third row.