How to make a horse out of paper diagram. How to make a paper horse. How to make a horse with children: step-by-step description

In Japanese, origami means folded paper. The history of its origin goes far back to Ancient China. It was there that paper and the first figures originally appeared. But this served only as a necessity in life. The most common to this day is the Chinese paper lantern.

Often during burial, the personal belongings of the deceased were replaced with paper strips on which it was written that they were being replaced. However, origami as an applied art developed in Japan. The word “God” in Japanese is consonant with the word “origami”, so this art began its development within a religious framework.

Temples were decorated with paper crafts. Paper was used as kindling for kindling sacrificial fires, and in boxes made of paper, gifts were presented to temples. Gradually, origami began to go out into society, beyond the gates of monasteries and temples. More and more different techniques appeared, but only a select few, people from the upper classes, owned them. The ability to fold various figures was a sign of good form.

When paper became known to everyone and was easily available, its price dropped significantly. It was then that origami gained its popularity in other countries and classes. This type of art was respected in Korea, Germany, and Spain.

Origami symbols were invented only in the mid-twentieth century. They made it possible to significantly simplify the description of the circuit. The initiator and author was the Japanese Akira Yoshizawa.

Types of origami

Based on the type of origami, it is divided into several types. Modular - folding one figure from several, wet - folding from wet paper, folding according to a development (pattern). And the simplest is ordinary origami. Even children can make such figures. You can make a zoo out of animals. And under magical hands the animals come to life.

Start of making a horse

To build a horse that can flip, you need to follow a few simple steps.

1. Place a square-shaped sheet of paper in front of you. Fold it diagonally, connecting the lower right corner to the upper left and iron it. Expand. Also connect the lower left corner and the upper right, iron, unfold.

2. Then, turn the sheet over and fold it in half. You should end up with 2 rectangles. Unfold, rotate 90 degrees and fold in half again. Lay it out. As a result, the straightened square should have 8 triangles.

3. Turn. The sheet should lie in front of you so that there is a diamond shape. Grab the side corners and connect them to the bottom corner. When folded, the top corner will also be pulled towards the bottom. Iron the resulting smaller diamond.

How are legs made?

4. Grab the right corner of the top layer and fold it towards the fold line in the middle to create a right triangle, point down. Do the same with the left corner. Fold the top corner along the top line of the triangles. Open the folded triangles.

5. Cut the top leaf along the vertical fold line to the horizontal one.

6. Bend the resulting parts upward so that you get 2 diamonds.

7. Then, fold each of these elements in half along a long diagonal.

Tail and head

8. Turn the figure over. Now do the same thing again from points 4 to 8.

9. You should get a figure that looks slightly like a rocket. Then, bend the upper right part of the part at an angle of 45 degrees so that the fold line is a continuation of the inside of the left part. On the left part, bend the corner to the left to create a head.

10. In order for the horse to be able to make turns, it needs to be slightly modified. To do this, straighten the tail, open it from the outside. Now fold it inward along the folds. Do the same steps with the horse's head. Ready! Now she can not only walk, but also roll over.

To make your horse stand more confidently on its feet, bend the corners of its legs inward. To perform somersaults, hit it sharply on the inside of the tail.

An ordinary sheet of paper, instructions and a few minutes not only calms you down, but also puts your thoughts in order.

In order to make a horse out of paper, you will need the following: thick colored paper or medium-density colored cardboard, A4 sheet, stationery (or any other) glue, paper scissors, nail scissors, thread, a needle with an eye, two large and two small buttons , nail polish with glitter and a pencil or pen.

First you need to make a stencil. To do this, on a white A4 sheet you need to draw the horse’s torso and legs separately. The image can be anything, both realistic and abstract, for example, in the form of a cartoon character. It depends only on desire and imagination, but it is important not to forget to sign the front side.

After which all parts of the stencil should be placed on colored paper.

Trace them with a pencil.

And then cut it too.

It turns out one side of the animal is made of colored paper, so the next step is to make the back side of the horse. To do this, you just need to turn the stencil over from the front side to the back side and do the same. You should end up with mirror pairs of all the parts like this.

After which they should be glued in pairs, let the glue dry a little and adjust the parts to each other, if necessary. There should be five pieces in total: a torso and four legs.

Then you need to attach the hind legs to the horse’s torso, one in front, the other in back, and make two holes using a needle for large buttons.

Now all that remains is to connect the blanks and buttons by stitching them with a thread and a needle.

With the front legs you need to do the same thing, only using small buttons.

This method of fastening will make the horse’s legs mobile and add volume to the product. The horse is almost ready, all that remains is to complete the final decoration. To do this, lines are drawn separating the mane and tail from the animal’s body, and then these areas are covered with glitter varnish.

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The paper horse is ready, all you have to do is wait until the varnish dries.

Origami horse is one of the most popular paper origami. If you don't know how to make an origami horse, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of an origami horse was taken by one of our site users. The horse in the second photo looks much more realistic. If you have photos of origami you have collected, send them to:This email address is being protected from spambots. You must have JavaScript enabled to view it.

Assembly diagram

Below is a diagram of how to assemble an origami horse from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami horse will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami horse quickly and without looking at the diagram.

Video master class

Assembling an origami horse may seem like a daunting task for beginners. Therefore, we advise you to enter the query “origami horse video” on the largest video hosting site on the Internet, YouTube. There you will find many different videos about an origami horse, which clearly show the steps to assemble a horse. We hope that after watching the video of the assembly master class, you will have no more questions about how to make an origami horse.

And here is another short video tutorial on how to make a horse out of paper:

This video is about how to make an origami horse for the New Year - the year of the horse:

Symbolism

The horse has been used by humans on the farm for a long time. Therefore, the horse has a large number of symbolic meanings. Since ancient times, it was generally accepted that the horse is a symbol of wisdom and nobility. For some, the horse symbolizes the speed of thought and the passage of time. Some consider the horse a symbol of light and agility.

You will need:

Patience
- Paper glue
- Paper (depending on how to make a paper horse, you can use paper of two different thicknesses)
- Craft knife
- What else?... Oh yes, I mentioned... patience!

Step 1: Print

Just print pages 1 and 2 of your chosen version, patience, glue and a craft knife will do the rest.

I loaded the templates into an inkjet printer and then printed them on regular paper (the quality of the paper horse blank depends on the printer and paper, of course), and strengthened the figure by gluing thicker paper under the front side.

There are two versions:

Women's / glamorous /
- (photo in the article of this particular version)

Ideal for children and fathers to spend some quality time together.

Simply print pages 1 and 2 for your chosen version...

Step 2: Assembling the Paper Horse

Cut out each piece along the contour (thick lines), push through the paper (dashed lines), and remove the hollow islands (red spots).
The pieces are numbered and the number refers to the piece that needs to be glued to the other.
Here are the main parts where there is no need to follow a specific assembly order:

Head,
- Neck;
- Legs;
- Rockers for legs.

I recommend starting with the legs (the more difficult parts) and the head, the rest are simple boxes.
At the end add the tail and horse mane. It is basically a flat section with adhesive applied to the edge and attached perpendicular to the head/body as shown in the photo.

Sorry, there are no photos of construction, I got carried away in a fit of creativity, so I didn’t take photos of how to make a paper horse at the last stages.

Step 3: Decorations for the paper horse

After assembling the horse, you can make some decorations, and also, if you are giving this thing to a child, protect it in a transparent case.

I just used an old plastic cell phone case, I also made a wooden deck, and a back wall to look like a fence.

The method is the same - you print on thin paper, thicken it, gluing thick paper on the back, blah, blah, blah - it should be quite simple, cut, cut, push, bend, glue, etc...

I also used some foam to make shrubs, this material is usually used for household purposes. It is very easy to model, just cut with a craft knife and smooth with finger pressure.

Step 4: TA - DA - YES - YES!

Well, there you go! Paper horse in all its glory!

And finally, the final touch is to glue the rockers to the horse’s legs to allow it to swing.

I hope you enjoy making a paper horse, perhaps the process could be a way for dads to keep their kids occupied for a couple of days!

Based on materials from www.instructables.com

Suitable for school age children (from 7, 8 years old).

You can make such horses with your children and decorate a Christmas tree or room with them. A real and simple symbol of the coming year can be decorated with felt-tip pens or pencils. Or you can play with them, for example, by arranging horse races.

Materials and tools for one horse: